Ambitions are running high for the smart home. Over the years we’ve been promised that eventually our smartphones are going to talk to our fridges, which can talk to our toasters with a little help from a friendly neighborhood internet-connected toilet. 

By comparison, the ambition of Philips Hue’s internet-connected light bulbs seem much more limited in scope. However, with its attention laser-focussed on lighting alone, Philips has created one of the most complete smart lighting systems out there, and it’s one that easily beats much of the smart home competition in terms of its robustness and completeness. 

However, while Philips Hue is definitely one of the better smart lighting systems out there, we’re still not entirely convinced that they’re decisively better than the traditional ‘dumb’ light bulbs that we’ve been using to light our households for decades. 

Where to start?

It’s tough to know where to start with Philips Hue since, after its initial release in 2012, the range has grown to encompass an almost frighteningly large array of colored light bulbs, lamps and lighting strips. 

At a minimum, you’ll need at least one connected light and the Philips Hue bridge, which connects to your router and allows you to communicate with your smart bulbs. This makes the two bulb and bridge-equipped starter kit ($69.99 / £59.99 / AU$144.95) the cheapest entry point into the range, but you’re forgoing more advanced features such as smart light switches and color-changing bulbs. 

For our tests we used the next step up, a three bulb starter kit that included the company’s color-changing bulbs. Despite the fact that this is still a fairly basic kit, this retails for a much more substantial $199.95 (£149.95 / AU$289.95).

The standard starter kit comes with a bridge and three bulbs.

Once you’ve bought this starter kit things get a lot cheaper however, as you only need one bridge to control your whole setup. Additional lights and switches can all be synced with this same bridge as you build up your home system. 

If you’re looking to jump into Philips Hue then this color-changing starter kit is probably the best way to do it, since it will allow you to play around with Hue’s more advanced features without investing to heavily in your initial setup. 

Outside of this starter kit, you have a huge number of options for how to proceed. You’ve got additional bulbs that are available in a wide variety of different form factors from candle bulbs through to spotlights, lamps and lighting strips. 

Philips also sells a couple of different switches, which allow you to control your lighting without getting your phone out of your pocket (although yes, we appreciate this is something you can already do with your existing lights – we’ll get to that later). 

Installation

Installation will vary with the complexity of your setup, but we found it to be about as painless a process as it could be. 

Once you’ve got the bulbs seated in their fixtures you’ll need to make sure they’re powered on in order for them to be discoverable. 

Next, you simply plug the Hue bridge into both power and your router, download the Hue app (available for and devices), and wait for it to discover the bulbs in your home. Our setup discovered the bulbs quickly and easily. 

Once your bulbs are discovered you’ll need to assign them to rooms, which allows you to control groups of them much more easily. 

With your bulbs assigned to rooms, the setup process is complete and you’ll be able to get stuck in configuring them to your heart’s delight. 

The one sticking point here, and it’s a big one, is that you’ll need to leave your bulbs turned on at the wall if you want to be able to control them remotely. Turn them off using your standard light switches, and the bulbs won’t have any power to be able to receive wireless signals. 

This proved to be a big problem, as you’ll see from the performance section to come. 

The Philips Hue app has recently undergone a redesign and is now much easier to use.

Philips Hue app

Philips has worked hard to develop its app, which has seen a great deal of improvement in the years since the smart bulb’s initial release. 

The default home screen shows you your available rooms, allowing you to control all their bulbs as a group. You can tap on the switch to the right of the screen to turn them on to their last setting. 

But if you’re using the default settings you’re nowhere near using the Philips Hue bulbs to their potential. The real fun starts when you tap the room’s icon on the left of the screen, which allows you to customize the exact bulb color. 

The easiest way to do this is with Philips’ pre-configured scenes, which range from ‘Spring Blossom’ (a cool, white light) through to ‘Savanna Sunset’ (a much richer yellow hue). We found ourselves relying mostly on the activity-specific defaults. ‘Energise’ was perfect for the mornings when the harsh white light worked well to blow away the cobwebs, while ‘Relax’ worked better in the evenings where we wanted our brains to wind down. 

If you want to get really granular you can adjust specific settings to create your own scenes, or even have the Hue app create a light scheme based on an imported picture. 

This additional functionality is appreciated, but in practice we didn’t feel the need to use it much. After all, there are only so many different shades of yellow to experiment with before the novelty wears off. 

The exception was using the lights to play around with bright, primary colors. We can’t ever see ourselves using these in our everyday lives, but they’d make a perfect accessory for a party atmosphere. 

Of much great importance is the routines section of the app. From here you’ll be able to set the lights to automatically turn on and off when you arrive at, and subsequently leave the house, as well as allowing you to have the lights turn on and off automatically at different times. 

By way of an example, we had the lights turn on to help us wake up in the morning, before automatically turning off when we left the house for work. In the evening we then had the lights turn back on when we arrived back at the house. You could also have the lights turn off automatically at a certain time, but we found it easier to do this manually. 

The Philips Hue Tap allows you to switch between up to four pre-defined scenes.

Philips smart switches

There are a couple of switches that Phillips has created to use with its Hue bulbs. As we mentioned earlier, these enable you to control the bulbs without using the app. This not only saves you from having to reach for your smartphone, but it means guests who do not have the app can still control the lights.

The first switch is the Philps Hue Tap Switch, which sells for $49.99 (£49.99, AU$79.95), and comes with four buttons. These buttons can be assigned to the scenes you’ve previously created, allowing you to quickly switch between light settings. You can also assign a button to turn off and on the lights. These settings are configured via a separate app.

The design of the Hue Tap switch is quite pleasant, with three reasonable sized buttons in the lower half of the device’s body. The fourth button is actually the entire face of the switch, which can be pressed in. However, while the design is nice, it does not look like a traditional light switch, which has a tendency to confuse visitors who don’t know what the device is for.

The Philps Hue Tap Switch is easily installed, as it comes with adhesives on the back that allow you to stick it to walls and other surfaces. It does not require batteries either – instead it uses the kinetic energy created when you push the buttons for power, which is pretty nifty.

The second switch is the Philips Hue Dimmer Switch, which has a more simple – and identifiable – design. It doesn’t have the complexity of the Tap Switch, and simply dims or brightens connected lights, or turns them on or off. It’s also more affordable, selling for $24.99 (£19.99, AU$34).

Third-party integration

Of course, the Philips app and accessories are only the start of the Philips Hue ecosystem thanks to the fact that the company has been at pains to integrate its products into a number of other third-party services including Amazon’s Alexa, Apple’s HomeKit, Google Home and IFTTT (aka If This, Then That). 

These integrations mean that you can use a dizzying number of devices to control your lights, meaning that if you ask ten different Philips Hue owners how they control their smart lights you’ll probably get ten different answers depending on which accessories they have connected and which phone operating system they use. 

Our primary reviewer was using an as their primary means of controlling their lighting setup. This meant that they had the option of jumping into the app to turn on their lights, or else control them from the phone’s control center menu via their HomeKit integration. 

They also got their Hue lights connected to an to allow for voice control. 

It’s easy to control your Hue lights using an Amazon Echo speaker like the Dot, pictured above.

Doing so was a simple matter of logging into a Hue account from within the Alexa app, after which point controlling the lights was as simple as asking Alexa to turn certain rooms on or off. 

A quick word of warning that you need to be sure to give each of your rooms a name that’s distinct and easy to pronounce. It might be convenient to simply name your bedroom ‘Bedroom’, but this will quickly become confusing as soon as you equip other bedrooms in your house with Hue lights. 

Meanwhile, another of our reviewers used the Nuimo – Smart Home Controller to control some Hue lightbulbs. This is a nicely designed (and pricey) controller, that worked well in some senses. However, it requires a Bluetooth connection to a smartphone with the Hue app installed, which makes things a little convoluted. So, if that phone is not in range, the controller doesn’t work. There is also a delay when using the Nuimo controller to control Hue, due to the controller having to communicated with the smartphone and then the app. It should be noted that this is a design flaw with Nuimo, rather than Hue. However, we’d suggest Philip’s own switches for quick control of Hue. They are easier to install and cheaper.

How convenient your Hue lights will be to use will vary massively depending on how much you invest in the ecosystem. One of our reviewers relied upon a combination of the Hue App, HomeKit, and Alexa, while the other used Hue alongside their Logitech Harmony Ultimate remote control. This enabled them to set up Hue scenes to accompany devices on the remote control. So, if they pressed “Watch a movie” on the remote control, not only would the TV, sound system and Blu-ray player turn on, but the Hue lights would also automatically dim.

Since their experiences differed so massively, we’ve split their two experiences out into two different sections below. 

Jon Porter, UK Home Technology Writer

Initially I thought that with a combination of HomeKit, Alexa, and automation I could completely remove the need to use light switches, but the reality is that after a couple of weeks of use I still end up using them out of convenience. 

Let’s start with the positives though, and the aspects of the lights that I’ve continued to use throughout the review process. 

Firstly, using the lights to wake myself up in the morning made it much easier to get out of bed in the morning. I’d set a time in the app, and then find myself gently nudged awake by the lights. It was also much more difficult to ignore them when turning them off involved opening an app to do so. 

However, the lack of options for using the lights as an alarm was annoying. Ideally you want a bright white light in the morning to energise yourself, but when using them as an alarm the bulbs would only ever turn on to their last color setting; and since I was using them late at night this was normally a night-friendly soft yellow glow. 

It was also a pleasure to use the lights late at night. I find bright lights can sometimes make me feel awake even when my body is tired, so being able to dim the Hue lights without having to install dimmer switches was helpful. 

Then when lying in bed it was helpful to be able to turn the lights off completely using my voice without having to either look at a bright phone screen or else walk over to the light switch. This was especially helpful when turning off lights in other rooms of the house that were accidentally left on. 

Unfortunately, outside of these two instances it was much harder to motivate myself to continue to use the smart lighting system. 

I’d either come home and inadvertently flick the light switch off because I forgot that I’d used the app to turn them off in the morning, or muscle memory would mean that I’d turn the bulbs off at the wall as I left the room – meaning I could no longer control them remotely when I re-entered. 

This really gets to the crux of the problem with all smart lighting products. It’s that no matter how good the app is, or how many third-party services it integrates with; the fact is that unless you invest in internet-connected light switches you’ll almost certainly find yourself controlling your lights the old fashioned way. 

This problem is doubled if you live with others. Try as I might, I simply couldn’t convince my flatmates that pulling out their phones was more convenient than using our home’s existing light switches. Nine times out of ten I’d arrive home to find the bulbs in the communal areas of the house turned off at the wall, and impossible to operate remotely. 

Ultimately I ended up using the smart bulbs as a bit of a hybrid. I’d automate their functionality for first thing in the morning or last thing at night, but then use them like regular light bulbs for the rest of the day. This felt like a waste considering the cost of the bulbs. 

Matthew Hanson, UK Computing Editor

I absolutely love my Hue setup, and use a variety of Hue devices around my home. With careful tweaking in the Hue app, and knowing the best Hue product to use for your needs, you can easily create some excellent – and handy – effects. For example, I have an outside light that I have installed a standard white Hue light bulb in. Using the Hue app, I have set this to turn on automatically when the sun sets, and to turn off when the sun rises. That means if I arrive home late at night, my door is safely illuminated. I’ve also named this light bulb ‘Outside light’, and then use my Amazon Echo to turn it off if I don’t need it, by simply saying “Alexa, turn off outside light”.

My living room is filled with various colored Hue lightbulbs that allow me to set the scene for various tasks, or times of day. As mentioned earlier, I have combined Hue with my Logitech Harmony remote, so it will automatically dim the lights when watching a movie, then brighten the lights when I’ve finished. It’s a cool effect, and in the Hue app you can set it so that this only happens when the sun goes down, which is a nice touch

I’ve also used the Hue LED lightstrip to run along the back of my fish tank (on the outside, of course), which provides some stunning lighting effects. With a bit of tweaking and imagination, you can do some excellent things with Hue, and I would love to fill my entire house with Hue bulbs and devices. However, these is a major obstacle to me doing this: price. 

These bulbs are pretty expensive, which is why I have used a combination of colored and white ones, to keep prices down. I’d love to use Philips Hue GU10 lightbulbs for the spotlights in my kitchen – but a pair costs £50 – and as I have eight lights that would set me back £200! However, I’ve found that a bit of patience with filling my home with Hue helps – if you wait for , you can often get some excellent Hue deals.

Philips definitely understands what the smart home needs right now. It’s produced a wide range of different bulbs, which create a complete lighting ecosystem, and it’s made an effort to integrate with almost every third-party service under the sun. 

This is really what the smart home needs right now. Not isolated products working in silos, but smart devices ready to integrate together to work as a team. 

All of this means that the Philips Hue bulbs are among the best smart bulbs on the market today, but the real competition is from traditional ‘dumb’ bulbs, which can be bought at a fraction of the cost. 

On this point we still think that unless you’re prepared to invest a lot of money in a full suite of bulbs and switches, then you won’t get the most out of your Hue bulbs. 

We liked

The Philips Hue range has grown considerably, and it now has bulbs for almost every type of light fixture. It’s also got a number of smart switches that allow you to control your lights the old fashioned way. 

The bulbs themselves produce a nice quality of light that’s much better than the harsh white light that used to be associated with LED bulbs. 

After a couple of key updates, the Philips Hue app is in a pretty good state. It’s quick and easy to turn your bulbs on and off and it’s also no trouble to set custom colors and scenes. 

Finally, Philips Hue integrates with an impressive number of third-party services, meaning that it makes it as easy as possible to get the bulbs speaking to the rest of your smart home. 

You’ll need to have the Philips Hue Bridge plugged into you router for the lights to work.

We disliked

They’ve come down in price over the years, but Philips Hue bulbs are still far more expensive than their non-smart equivalents. If you’re going to purchase them then you’re going to need to make the most out of their smart functionality or else that extra money will have been spent in vain. 

This expense gets even worse if you want to build a complete ecosystem. Additional light switches can cost as much as the bulbs themselves. 

The problem is that without them you’ll need to constantly pull your phone out of your pocket to turn the lights on and off, and over time you might find yourself just using your old light switches – which makes your smart lighting seem redundant. 

Final verdict

If you’re prepared to invest in the complete ecosystem, then Philips Hue really does offer the best smart lighting solution around. Philips offers almost everything you could need to build a smart lighting system, and its integration with third-party services allows you to fill in any blanks. 

But if you’re hoping to get away with investing in a couple of bulbs and calling it a day then you might end up being disappointed as it can end up feeling like a hassle having to use your phone to control your lights. 

LEAVE A REPLY